INTRODUCTION
For most bacterial pathogens, the crucial sequential steps in the establishment of infection are first the attachment and then the colonization of the host cells. Attachment involves binding to either specific host cell receptors or extracellular matrix (ECM) proteins. Associated with such processes, pili or fimbrial adhesins have been the main factors studied in Gram-negative bacteria. In recent years, trimeric autotransporter adhesins (TAAs), a group of nonfimbrial adhesins, have emerged as key determinants of the pathogen's success (
1). TAAs share an organization consisting of a conserved membrane-embedded C-terminal domain forming a trimeric beta-barrel pore and providing the transition of the passenger domains (stalk and head[s]) to the bacterial cell surface (
1). YadA from
Yersinia enterocolitica is the prototype TAA (
2). Besides YadA, several other TAAs have been identified, all described to act as adhesins, promoting adherence to host cells and/or ECM proteins (
3). Moreover, these proteins proved to be multifunctional virulence factors involved in other biological traits, including biofilm formation (
4), hemagglutination (
5), serum resistance (
6,
7), and adhesion to and invasion of host cells (
8,
9).
The complement system is the first line of innate immune defense against intruders. The activation of this system triggers a cascade of protein deposition on the bacterial surface, resulting in the assembly of the membrane attack complex and opsonization of the pathogen, followed by phagocytosis. Several bacterial pathogens are known to be resistant to the innate immune system, being able to escape bactericidal killing by the complement system (
10). A list of TAAs have been reported to be part of the complement evasion mechanisms of many bacteria, such as YadA (
11), NhhA from
Neisseria meningitides (
12), UspA1 and UspA2 from
Moraxella catarrhalis (
7), DsrA from
Haemophilus ducreyi (
6), Eibs from
Escherichia coli (
13,
14), and Omp100 from
Aggregatibacter actinomycetemcomitans (
15).
The
Burkholderia cepacia complex (Bcc) consists of 17 closely related species that emerged as opportunistic human pathogens, particularly in patients with cystic fibrosis (CF) (
16). Although all Bcc species can cause respiratory infections,
B. cenocepacia and
B. multivorans are the species most commonly recovered from sputum of CF patients (
16). They have the ability to spread from patient to patient and are associated with unpredictable clinical outcomes ranging from asymptomatic carriage to fatal acute pneumonia (cepacia syndrome) (
17). Within the species
B. cenocepacia, several epidemic lineages have been described and were responsible for various outbreaks in large geographic regions. Among these,
B. cenocepacia CF isolate J2315, belonging to the epidemic lineage Edinburgh-Toronto (ET-12) (
18,
19), is one of the best-studied Bcc pathogens. Despite the identification of a considerable number of virulence factors associated with this pathogen, many aspects of infection, namely, bacterial adhesion to and invasion of host cells and complement escape, remain to be elucidated. In an attempt to contribute to the elucidation of such events, we aimed to investigate the role of newly identified
B. cenocepacia J2315 TAA-encoding genes.
The use of computational searches revealed the existence of seven TAA-encoding genes in the genome of epidemic
B. cenocepacia strain J2315 (
20). Among these, three TAA-encoding genes (
BCAM0219,
BCAM0223, and
BCAM0224) are clustered in a 30-kb region together with neighboring two-component systems, which may regulate their virulence-associated functions (
20,
21). In a previous study, we reported that the
BCAM0224 gene was detected exclusively in epidemic
B. cenocepacia strain J2315. We also found that a
B. cenocepacia BCAM0224 mutant exhibited attenuated virulence in a
Galleria mellonella infection model (
22). For the neighboring TAA gene
BCAM0223, we showed that its disruption in
B. cenocepacia caused marked decreases in hemagglutination, properties of adherence to vitronectin, serum resistance, adhesion to epithelial cells, and virulence (
21). Furthermore, in a recent study, atomic force microscopy (AFM) was used to measure the homophilic
trans-interaction forces between trimeric forms of BCAM0224 (
23). In order to gain new insights into the mode of action of the
B. cenocepacia TAA virulence-associate factors, this study provides a more complete understanding of how the TAA-encoding gene
BCAM0224 contributes to bacterial virulence, highlighting its multifaceted roles during host infection.
MATERIALS AND METHODS
Bacterial isolates and culture conditions.
B. cenocepacia clinical isolate K56-2, an ET-12 isolate, was kindly provided by J. J. LiPuma (University of Michigan). The
B. cenocepacia K56-2
BCAM0224::Tp mutant and
Escherichia coli strain BL21(DE3) expressing the
BCAM0224 gene were described in a previous study (
22). Bacteria were cultured in Luria-Bertani (LB) broth (Conda, Pronadisa) at 37°C with orbital agitation at 250 rpm. When appropriate, medium was supplemented with 150 mg/liter of ampicillin (for
E. coli), 150 mg/liter of trimethoprim, or 100 mg/liter chloramphenicol (for the
B. cenocepacia mutant). For functional studies, the parental and mutant
B. cenocepacia strains were grown in 24-well plates for 17 h under conditions of limited oxygen supply in LB broth supplemented with 300 mM NaCl and 10 mM H
2O
2. A limited oxygen supply (6 to 12%) was achieved by growing cultures in incubation jars containing an atmosphere generator for microaerophilic conditions (GENbox; bioMérieux).
Cell lines and cell culture.
Two human bronchial epithelial cell lines were used: 16HBE14o− cells, which are normal bronchial cells, and CFBE41o− cells, which are homozygous for the delta F508 mutation in a cyclic AMP (cAMP)-activated chloride channel (CF transmembrane conductance regulator), leading to decreased chloride ion transport and impaired water transport across the cell membrane, corresponding to a CF airway. Both cell lines were immortalized and characterized (
24,
25). Cells were maintained in fibronectin-collagen I-coated flasks in minimum essential medium with Earle's salt (MEM) (Gibco) supplemented with 10% fetal bovine serum (FBS) (Lonza), 0.292 g/liter
l-glutamine (Sigma-Aldrich), and penicillin-streptomycin (100 U/ml; Alfagene) in a humidified atmosphere at 37°C with 5% CO
2.
3D structure prediction.
Three-dimensional (3D) structure prediction of the full-length monomer of BCAM0224 was performed by using the I-TASSER fold recognition method (
http://zhanglab.ccmb.med.umich.edu/I-TASSER) (
26) and visualized with Swiss-PdbViewer V.4.0. The predicted 3D structure of the C-terminal region (residues 822 to 910) was obtained with Swiss Model Workspace (
http://swissmodel.expasy.org/workspace/), based on the crystal structure of the Hia outer membrane (OM) domain (PDB accession number 2GR7). To predict the trimerization of the C-terminal region (anchor) of BCAM0224, we used Cluspro 2.0 software (
http://cluspro.bu.edu/home.php), an automated docking and discrimination method for the prediction of protein complexes (
27).
Generation of an anti-BCAM0224 antibody.
A fragment of the BCAM0224 gene, encoding 284 amino acids (aa) of the passenger domain (aa 383 to 666), was amplified by using B. cenocepacia K56-2 genomic DNA as the template and primers FBCAM0224383 (5′-TTTCATATGTCGCAACTGCACGGTGTGT-3′) and RBCAM0224666 (5′-AAACTCGAGGGTCACGCTGTCGAACGACAA-3′), containing NdeI and XhoI restriction sites (underlined), respectively. The fragment was cloned into plasmid pET23a (Novagen) to generate pDM5 and introduced by electroporation into E. coli BL21(DE3). To overexpress the BCAM0224383–666 polypeptide with a 6×His tag at its C terminus, 1 liter of LB broth was inoculated at an initial optical density at 640 nm (OD640) of 0.1 by using a culture grown overnight. The cells were grown to an OD640 of 0.6 and induced with 1 mM isopropyl-β-d-thiogalactopyranoside (IPTG) (Sigma-Aldrich) for 3 h at 37°C with orbital agitation at 250 rpm. BCAM0224383–666-His protein was purified by affinity chromatography on a Histrap column prepacked with high-performance Ni2+ Sepharose (GE Healthcare), and purity was verified by 12% acrylamide sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Polyclonal antibodies against BCAM0224 were produced by immunization (Agro-Bio, France) of two rabbits with recombinant BCAM0224383–666-His. The resulting immunized serum was then purified by affinity chromatography (Agro-Bio, France), and purified anti-BCAM0224383–666-His was used in all experiments.
Bacterial membrane extracts.
Bacterial cultures of B. cenocepacia K56-2 and the BCAM0224::Tp mutant were grown in 200 ml of supplemented LB broth under microaerophilic conditions, as mentioned above. After 17 h of growth, bacteria were harvested by centrifugation at 9,000 × g for 10 min at 4°C. Bacterial pellets were washed with 50 mM Tris-HCl (pH 7.4) and resuspended in 5 ml of the same buffer containing a protease inhibitor mixture (Roche), 1 mM phenylmethylsulfonyl fluoride (PMSF) (Sigma), 50 μg/ml DNase (Qiagen), and 50 μg/ml RNase (Sigma). The suspension was sonicated 8 times for 30 s at 40 W (Branson). Unbroken cells and debris were removed by centrifugation at 10,000 × g for 15 min at 4°C, and the supernatant was ultracentrifuged at 100,000 × g for 1 h at 4°C (SW41Ti rotor; Beckman) to pellet the cell envelopes. The total membranes were resuspended in 50 mM Tris-HCl (pH 7.4) buffer, and total protein quantification was performed by using a protein assay kit (Bio-Rad Laboratories).
Western blot analysis.
For Western analysis, a volume of the membrane extracts corresponding to 100 μg of the total protein was dissolved in sample buffer (Laemmli buffer with 5% [vol/vol] 2-β-mercaptoethanol and 5% [vol/vol] bromophenol blue), boiled for 10 min, and separated by 6% SDS-PAGE. Some samples were denatured by using 6 and 8 M urea (Sigma) in the sample buffer. Proteins were transferred onto nitrocellulose membranes (Bio-Rad) by using a Trans-Blot Turbo transfer system (Bio-Rad). Membranes were blocked with 5% (wt/vol) nonfat dry milk in phosphate-buffered saline (PBS) containing 0.5% (vol/vol) Tween 20 (PBS-T) for 1 h, incubated with purified anti-BCAM0224 antibody (diluted 1:5,000), and washed three times for 5 min with PBS-T. Membranes were then incubated with a secondary antibody (diluted 1:2,000), goat anti-rabbit serum conjugated to horseradish peroxidase (Santa Cruz), for 1 h. Proteins were detected by the addition of ECL reagent (Pierce) as a substrate and exposed to autoradiographic film (Amersham).
Confocal laser scanning microscopy assays.
Confocal laser scanning microscopy analyses were performed as previously described (
21). Briefly, bacteria were stained by using plasmid pIN29, which encodes the red fluorescent protein DsRed (
28). The plasmid was electroporated into
B. cenocepacia K56-2 and the
BCAM0224::Tp mutant. For surface localization experiments,
B. cenocepacia K56-2 and the
BCAM0224::Tp mutant were grown in supplemented LB broth under microaerophilic conditions, as mentioned above. After 17 h of growth, 200 μl of bacterial suspension at an OD
640 of ∼1.5 was harvested by centrifugation and washed with PBS. For bacterial adhesion, the procedure was carried out as described above, but glass coverslips were placed into 24-well plates before cell seeding. At the end of the adhesion experiment, cells were washed three times with PBS.
Immunostaining of samples from both experiments was done by using the same steps. Samples were fixed with 3.7% paraformaldehyde (20 min), quenched with 50 mM NH4Cl (10 min), immersed in 0.2% Triton X-100 (5 min), and saturated with 5% bovine serum albumin (BSA) (30 min). Samples were incubated with primary mouse E-cadherin antibody (Santa Cruz) (1:100 dilution) for adhesion experiments and anti-BCAM0224 antibody (1:50 dilution) for localization experiments, followed by secondary polyclonal goat anti-mouse serum coupled to Alexa 488 (Santa Cruz) (1:500 dilution). Finally, the coverslips or bacterial suspensions were mounted in Vectashield with 4′,6-diamidino-2-phenylindole (DAPI) (Vector Laboratories).
All samples were examined on a Leica TCS SP5 (Leica Microsystems CMS GmbH, Mannheim, Germany) inverted microscope (model no. DMI6000) with a 63× water (1.2-numerical-aperture) apochromatic objective (
29).
Complementation of the B. cenocepacia K56-2 BCAM0224::Tp mutant.
The complete coding sequence of the
BCAM0224 gene was obtained from plasmid pDM3 (
22) by digestion with NdeI and XbaI restriction enzymes. This DNA fragment was ligated into plasmid pIN177 (
tac promoter; Cm
r) (A. Vergunst and D. O'Callagan, unpublished data) before transformation into
E. coli DH5α and selection with 100 mg/liter chloramphenicol. The resulting plasmid, pDM6, was introduced into the
BCAM0224::Tp mutant by electroporation, being replicative in
Burkholderia.
Biofilm formation assays.
Biofilm formation on polystyrene surfaces was measured by using the crystal violet method as follows: bacterial cultures were grown in 3 ml LB broth supplemented with 300 mM NaCl and 10 mM H2O2 (initial OD640 of 0.2) in glass tubes for 17 h at 37°C at 60 rpm under microaerophilic conditions. In each case, cells were harvested, washed, and diluted in LB broth to an OD640 of 0.05, and 200 μl of these cell suspensions was inoculated into wells of a 96-well polystyrene microtiter plate. Plates were statically incubated at 37°C for 24 or 48 h. Quantification was achieved by removing the culture medium and unattached bacterial cells. Wells were rinsed three times with deionized water, and adherent bacteria were stained with 200 μl of a 1% (wt/vol) crystal violet solution for 15 min at room temperature. The solution was removed, and three gentle rinses with deionized water were performed. Finally, the dye was solubilized with 95% ethanol, and the absorbance was measured at 595 nm in a microplate reader (Versamax; Molecular Devices). Results are mean values of at least 20 replicates from 3 independent experiments.
Motility assays.
Swimming plates (0.3% Bacto agar [Difco], 10 g/liter tryptone, and 5 g/liter NaCl) and swarming plates (0.5% Bacto agar and LB medium supplemented with 5 g/liter glucose) were prepared by using square plates. For estimations of motility, bacterial cultures were grown under defined conditions. The culture OD640 was adjusted to match a density of 1, and one 3-μl drop of each culture was inoculated onto agar surface and incubated at 37°C for 48 h, followed by halo diameter determinations.
Serum bactericidal assay.
A serum bactericidal assay was performed as previously described (
21). Briefly, bacterial cultures were grown under microaerophilic conditions, as mentioned above. After 17 h of growth, they were diluted in PBS to a final concentration of 10
6 CFU/ml. Subsequently, 10 μl (10
4 CFU) of the cell suspension was added to 30 μl of normal human serum (NHS) (Sigma-Aldrich) and 60 μl of PBS, resulting in a final serum concentration of 30%. Tubes were incubated at 37°C for 1 h and then placed on ice. After this, samples were serially diluted and plated. To determine the initial bacterial load, we used a tube with NHS replaced by PBS. As a control, we performed all experiments in parallel using heat-inactivated NHS (hNHS) at 56°C for 30 min. The percentage of survival was determined as the quantity of bacteria that survived relative to the initial bacterial load.
To test the involvement of the various complement pathways, we used factor B-depleted NHS (B−NHS) (Quidel), which has the alternative complement activation pathway blocked. To block both the classical and lectin pathways, we used PBS containing 10 mM MgCl2 and 10 mM EGTA to equilibrate NHS (LC−NHS) for 15 min on ice prior to the addition of bacteria. Finally, to selectively block the classical pathway, a C1q-depleted serum (C−NHS) (Quidel) was used.
Adhesion and invasion of epithelial cells.
Adhesion and invasion experiments were carried out on 16HBE14o− (non-CF) and CFBE41o− (CF) bronchial epithelial cells as described previously (
21), with some modifications. Cells were seeded in 24-well plates (Orange Scientific) 1 day prior to infection at 5 × 10
5 cells per well in supplemented MEM. Bacterial strains were grown as described above and used to infect cells at a multiplicity of infection (MOI) of 50:1. After infection, plates were centrifuged at 700 ×
g for 5 min. For adhesion assays, the infected monolayers were incubated for 30 min at 37°C in an atmosphere containing 5% CO
2. Each well was washed three times with PBS, and cells were lysed by applying lysis buffer (10 mM EDTA, 0.25% Triton X-100) for 30 min at room temperature. The adherent bacteria were quantified by plating serial dilutions of the cell lysates onto LB agar plates and incubating the plates for 24 h at 37°C. For invasion assays, the infected monolayers were incubated for 2 h to allow bacterial entry and washed three times with PBS, MEM containing amikacin and ceftazidime (2 mg/ml each) was added, and the mixture was incubated for another 2 h. Supernatants were then plated to confirm the effectiveness of the antibiotic treatment, and cell monolayers were washed three times with PBS. The number of intracellular bacteria was determined by lysing cells with lysis buffer (30 min at room temperature) and plating serial dilutions onto LB agar plates. Results are expressed as a ratio of the wild-type cells and corrected with the initial bacterial dose applied.
We also tested the ability of the antibody (anti-BCAM0224) to inhibit adhesion to and invasion of epithelial cells by wild-type B. cenocepacia K56-2 and the BCAM0223::Tp mutant. Bacterial suspensions were incubated with the purified anti-BCAM0224 rabbit polyclonal antibody (diluted 1:10) for 1 h at room temperature. Samples were washed with PBS and used to infect cell monolayers according to the adhesion and invasion assays described above. Control experiments including an irrelevant rabbit serum (Sigma) were used as a control.
Statistical analysis.
Data are expressed as mean values of a minimum of three independent experiments ± standard deviations (SD). Statistical analysis was carried out by using Statistica 7 software. One-way analysis of variance (ANOVA) and Bonferroni's multiple-comparison test were performed to determine statistically significant differences. Tukey's test for unequal group sample sizes was used for biofilm comparisons. A P value of <0.05 was considered statistically significant.
DISCUSSION
In a previous study, we identified a gene,
BCAM0224, encoding a trimeric autotransporter adhesin (TAA), which appears to be restricted to epidemic-associated
B. cenocepacia strains of the ET-12 lineage (
22). Transcriptional analysis revealed that
BCAM0224 is located within a bicistronic operon composed of 9 genes, which comprises, among others, two additional TAA-encoding genes (
BCAM0219 and
BCAM0223) (
21). In an attempt to characterize the functions of the TAA-encoding genes in
B. cenocepacia, we have generated mutations and analyzed the associated phenotypes. Based on this, we previously proposed that the BCAM0224 protein is involved in virulence, since the
BCAM0224 mutant was less virulent than the wild-type strain in an insect infection model (
22). In addition, disruption of the
BCAM0223 gene impairs the ability of the mutant strain to adhere to epithelial cells, decreases serum resistance, and reduces virulence (
21). Finally, in a recent report, we used atomic force microscopy (AFM) to study association constants and conformational properties of the BCAM0224 protein. We have determined homophilic
trans-interactions (BCAM0224-BCAM0224) as well as heterophilic interactions (BCAM0224 with collagen). Both interactions displayed relatively low binding affinity, which could be important for epithelium colonization (
23).
In the present study, we are continuing to characterize the role of the BCAM0224 protein, aiming to assess its contribution to the overall pathogenicity of
B. cenocepacia. The
BCAM0224::Tp mutant described previously (
22) was used in this study. To investigate whether the insertion of a trimethoprim resistance cassette within the
BCAM0224 gene may have polar effects on the expression of the neighboring gene
BCAM0223, we performed real-time reverse transcription-PCR. The results obtained showed that the
BCAM0224 mutation does not affect the downstream gene in the operon (data not shown).
Although the structure of a full-length TAA has not yet been solved, structures for individual domains have been determined (
36). In this study, the BCAM0224 3D structures of various domains were modeled by using I-TASSER, an automated structure prediction tool. Although the primary sequences between the query BCAM0224 and the templates were significantly different, I-TASSER is effective at predicting the structures. When displayed on the cell surface, BCAM0224 appears to comprise one apical YadA-like head domain followed by an extended stalk and finally a second head. Overall, approximately 63% of the surface-exposed structure is made up of stacks of beta-sheets (
Fig. 1). It is noteworthy that the structure of the stalk is unique among TAAs in lacking the common coiled-coil structural motif. In contrast, the hydrophobic C-terminal domain (anchor domain) represents the most highly conserved domain within the TAA proteins. Finally, in good agreement with bioinformatic predictions, we detected the presence of BCAM0224 assembled into trimers in the membrane of wild-type and BCAM0224-complemented strains of
B. cenocepacia K56-2 (
Fig. 2A). These trimeric structures were stable under standard denaturing treatment conditions (heating and SDS) but dissociated completely in the presence of chaotropes (e.g., 8 M urea), a common feature of TAAs (
37). By confocal microscopy, we were able to confirm the localization of BCAM0224 at the bacterial surface (
Fig. 2B).
Being an adhesin, we analyzed the possible involvement of BCAM0224 in biofilm formation. In fact, the
BCAM0224::Tp mutant showed a decreased capacity to form biofilm on a polystyrene surface (
Fig. 3), suggesting some involvement of BCAM0224 in biofilm formation. This phenotype has been implicated in the persistence of pathogens in their host (
34) and is also associated with many TAA proteins (
32,
33). Additionally, it is recognized that motility influences biofilm formation at different stages (
34). Indeed, at the initial stages of biofilm formation, motility is required and crucial for biofilm architecture (
34). We saw that mutation of the
BCAM0224 gene abolished flagellum-based motility (swarming), thereby contributing to the observed impaired biofilm formation of the
BCAM0224::Tp mutant. It should be noted that the crystal violet-based assay likely represents only a few early events in biofilm formation (
38). Therefore, we hypothesize that
BCAM0224 expression in response to particular environmental conditions might be involved in fine-tuning the balance between surface motility and biofilm.
Several bacterial pathogens are known to be resistant to the innate immune system, being able to escape bactericidal killing by complement.
B. cenocepacia K56-2 is resistant to the bactericidal effect of serum complement (
39), and we showed in our previous work that the TAA-encoding
BCAM0223 gene is involved in this capacity (
21). In fact, TAAs are known to play a major role in serum resistance, and some bacteria possess more than one TAA involved in this process, like
M. catarrhalis and
E. coli (
6,
7,
13,
14). In the present study, we demonstrated that the BCAM0224 TAA is also involved in normal human serum resistance. The
BCAM0224 mutant was serum sensitive, and complementation in
trans restored serum resistance although not completely (
Fig. 4). This could be the result of an excessive level of BCAM0224 in the complemented strain, which could be harmful to the host and thereby may explain the partial complementation of the phenotypes (data not shown). Furthermore, we conclude that the classical complement pathway is essential for the killing of the
BCAM0224 mutant. The mechanism of action of BCAM0224 in the classical pathway is not yet known; however, it is possible that it uses of one of the typical strategies used by other pathogens, such as the recruitment or mimicking of complement regulators/inhibitors and the modulation or inhibition of complement proteins by direct interactions (
40). Interestingly, BCAM0224 promotes adhesion to vitronectin (data not shown), a known inhibitor of the complement cascade acting to limit the self-reactivity of the innate immune response (
41,
42). The ability to bind vitronectin suggests that BCAM0224 could use this property to inhibit complement-mediated attack. On the other hand, BCAM0224 vitronectin binding confers bacterial camouflage with nonimmunogenic proteins. Several TAAs have been described as the key points for vitronectin-dependent serum resistance in bacterial pathogens. Indeed, vitronectin binding to TAAs was shown to contribute to serum resistance in other pathogens, such as Hsf from
H. influenzae type b (
41), DsrA from
H. ducreyi (
6), and UspA2 from
M. catarrhalis (
43).
Attachment to lung epithelial cells is a preliminary step in lung colonization by Bcc species. Sajjan and coauthors (
44) demonstrated the role of cable pili in association with the 22-kDa adhesin in the binding of piliated
B. cenocepacia to lung explants from CF patients. Furthermore, we recently showed that
BCAM0223 (neighbor of the
BCAM0224 gene) is also involved in host cell adhesion (
21). Here, we provide evidence that BCAM0224 is another important adhesin involved in
B. cenocepacia (ET-12 lineage) adhesion to CF (CFBE41o−) and non-CF (16HBE14o−) cultured human epithelial cells (
Fig. 5). We found that the inhibitory effects of both BCAM0223 and BCAM0224 on the adherence of
B. cenocepacia to host cells appeared to have a more profound effect on cells with a non-CF phenotype (
Fig. 5) (
21). These observations suggest that, at least
in vitro and under the experimental conditions used, CF cells may have BCAM0223 and BCAM0224 adherence receptors on the surface at a lower level.
Another important step of Bcc infection is the capacity to invade epithelial cells. Several reports have shown that
B. cenocepacia J2315 is able to invade human respiratory epithelial cells in culture and that this process is facilitated by flagellar and lipase activities (
45–47). Entry into epithelial cells is a multifactorial action of pathogens that enables infection by facilitating the evasion of immune responses, penetration of host epithelial barriers, and migration through host tissues. Ultimately, this results in the pathogen becoming blood borne, an outcome of systemic infection. Our findings indicate that BCAM0224 is involved in the invasion capacity of
B. cenocepacia isolates of the ET-12 lineage (
Fig. 6A) in both cell lines. However, the lack of flagellum-based motility of the
BCAM0224 mutant (
Fig. 3B) could be involved in the decreased invasion of this mutant. More studies will be needed to understand the correlations of BCAM0224 and motility. The combination of multivalent interactions with host cells, such as adhesion and invasion, observed for BCAM0224 was also described for other TAAs, such as ApiA from
Actinobacillus actinomycetemcomitans (
48), HadA and NadA from
N. meningitides (
8,
49), and YadBC from
Yersinia pestis (
50).
In this study, we observed that the use of an anti-BCAM0224 antibody inhibits the ability of wild-type
B. cenocepacia strain K56-2 to adhere to and invade host cells
in vitro. We also tested the
BCAM0223::Tp mutant (
21) for the inhibitory effect of an anti-BCAM0224 antibody, resulting in a synergistic defect in cell adhesion and invasion. This finding indicates the possible use of anti-BCAM0224 antibody for passive immunization in antiadhesion therapies. In fact, adhesin-based vaccines have emerged as a new attractive approach to treat bacterial diseases (
51), and a recent study points to anti-TAA antibody as a valuable vaccine candidate against
Acinetobacter baumannii infections (
52). Research is under way in our laboratory to pursue this possibility.
In conclusion, we characterized in detail the multifunctional TAA BCAM0224 from
B. cenocepacia and showed that it affects earlier stages of biofilm formation and motility. This protein also plays an important role in the evasion of the host immune system, providing bactericidal serum resistance via the classical pathway. Moreover, it seems to be important for epithelial cell adhesion and invasion. Altogether, these results underlie the high versatility of the BCAM0224 virulence factor, which plays multiple roles in the pathogenesis of
B. cenocepacia. By comparing the multifaceted activity of the BCAM0224 TAA with the multifunctionality associated with the disruption of the TAA gene
BCAM0223 (
21), we speculate that they can work together, cooperating for an established trait.