INTRODUCTION
Proteins belonging to the bacterial tyrosine kinase (BY-kinase) family have no eukaryotic homologues and were first described as being involved in the biosynthesis of polysaccharides in several bacterial systems. BY-kinases contain Walker A and Walker B ATP-binding motifs that bind ATP and use it to promote tyrosine phosphorylation. This posttranslational modification can be reversed by the action of protein tyrosine phosphatases (PTPs), whose genes are usually located near the genes encoding BY-kinases. Cycles of tyrosine phosphorylation and dephosphorylation by the actions of BY-kinases and PTP proteins, respectively, have been shown to control the amount of and/or molecular weight of the polysaccharide (
1,
2). In addition, several studies have shown that BY-kinases are able to interact with other proteins that are not connected to polysaccharide biosynthesis, promoting their phosphorylation and thereby controlling their activity and, in some cases, their cellular location (
1,
3). Therefore, BY-kinases are implicated in several cell functions, such as DNA metabolism, resistance to stress, and cellular division, among others (
4–7). Regarding bacterial tyrosine phosphatases, they can be grouped in the families of the eukaryotic-like phosphatases (PTPs) and dual-specific phosphatases, the low-molecular-weight protein tyrosine phosphatases (LMW-PTPs), and the polymerase-histidinol phosphatases (PHPs) (
8). Despite many of them being involved in polysaccharide production (
2), several have been implicated in host-bacteria interactions (
8). Examples include the following: the YopH protein tyrosine phosphatase of
Yersinia pseudotuberculosis, which promotes cytoskeletal rearrangements and inhibition of phagocytosis (
9); SptP from
Salmonella enterica serovar Typhimurium and StpA from
Salmonella enterica serovar Typhi, which disrupt the host cell cytoskeleton (
10,
11); MptpA and MptpB from
Mycobacterium tuberculosis, which inhibit phagosome maturation (
12,
13) and subvert the host immune response (
14); LipA of
Listeria monocytogenes, which interferes with the actin cytoskeleton (
15); and the nonfunctional tyrosine phosphatase Dpm of
Burkholderia cenocepacia, which has been implicated in the delayed maturation of bacteria-containing vacuoles in macrophages (
16). All these characterized tyrosine phosphatases, acting as effector proteins, are secreted into eukaryotic cells and, except for MptpA and Dpm, which are LMW-PTPs, all of the other mentioned enzymes are members of the PTP family (
8,
16).
Bacteria belonging to the
Burkholderia cepacia complex are ubiquitously found in natural environments but also occur as contaminants in man-made products, such as pharmaceuticals, cosmetics, and disinfectants (
17). They are opportunistic pathogens, particularly for cystic fibrosis (CF) patients. Although a transient infection of the respiratory tract may occur for some patients, the acquisition of
B. cepacia complex most typically results in chronic infection (
17,
18). Depending on the
B. cepacia complex strain, this colonization ranges from asymptomatic to a rapid decline of lung function characterized by a necrotizing pneumonia and the development of septicemia known as cepacia syndrome (
19).
Burkholderia cenocepacia and
Burkholderia multivorans are the predominant species in infected CF patients (
20,
21), but an increasing number of outbreaks caused by
B. cepacia complex species such as
Burkholderia contaminans has been reported (
22–24).
B. cepacia complex species are also intrinsically resistant to several antibiotics and able to form biofilms, making their eradication from both lungs and clinical devices very difficult (
25–27).
In vitro studies have shown that during infection of lung epithelial cells,
B. cepacia complex isolates adhere to the apical surface of the epithelium, forming microcolonies followed by cell invasion and disruption of tight junction integrity, promoting bacterial translocation to the basolateral surface via paracytosis (
28–30). The ability of
B. cepacia complex strains to cross the epithelium paracellularly or transcellularly, penetrating the airway barriers, is associated with the ability of these bacteria to cause cepacia syndrome (
31,
32).
Many
B. cepacia complex virulence factors have been characterized and implicated in virulence or persistence of the infection (reviewed in reference
33). Among these virulence factors is the exopolysaccharide (EPS) cepacian, which has been found to be produced by clinical and environmental
Burkholderia species, including
B. cepacia complex and non-
B. cepacia complex species (reviewed in reference
34). Among the proteins required for cepacian biosynthesis, the BY-kinase BceF and the LMW-PTP BceD, which are conserved among the
Burkholderia genus, seem to have a central role in the regulation of cepacian production (
35,
36). In addition, the CF clinical isolate
Burkholderia contaminans (formerly
B. cepacia) strain IST408
bceF mutant showed lower swarming and swimming motilities, failed to produce biofilms on abiotic surfaces, was less resistant to stress conditions such us UV irradiation and heat shock stress, showed attenuation of virulence in
Galleria mellonella, and was completely avirulent in a chronic granulomatous disease gp91
phox−/− mouse infection model (
7,
35,
37). As posttranslational modifications mediated by BceF and possibly BceD proteins are implicated in several cellular processes, including virulence properties, we investigated the importance of both proteins in the interaction of
B. cepacia complex bacteria with host cells. Namely, we used a cystic fibrosis CFBE41o- lung epithelial cell line model to test adhesion, invasion, tight junction disruption, and immune stimulation by the CF clinical isolate
B. contaminans IST408 and its isogenic derivative
bceD and
bceF mutants.
MATERIALS AND METHODS
Bacterial strains and media.
The bacterial strains used in this study were the highly mucoid genetically modifiable CF clinical isolate
Burkholderia contaminans IST408 and its derivative insertion mutants
bceD::Tp,
bceE::Tp, and
bceF::Tp (
7,
35) and
Escherichia coli strains NCIB9415 (NCIMB, United Kingdom) and DH5α (
38). By using
recA-based genomovar-specific primer pairs for gene amplification followed by restriction fragment length polymorphism analysis with HaeIII, strain IST408 was considered for several years to belong to the species
B. cepacia (genomovar I, taxon K). Recently, with the introduction of the multilocus sequence typing (MLST) method (and sequencing of the genes
atpD,
gltB,
gyrB,
recA,
lepA,
phaC, and
trpP), this strain was relocated to the species
B. contaminans (according to the Burkholderia MLST database, it is ST96). This strain has been used as a model for cepacian biosynthesis (
34). All strains were routinely cultured in Lennox broth (LB) at 37°C. Growth medium was supplemented with antibiotics when required to maintain the selective pressure at the following concentrations: for
B. contaminans strains, trimethoprim at 100 μg/ml and chloramphenicol at 100 μg/ml; for
E. coli strains, chloramphenicol at 25 μg/ml and kanamycin at 50 μg/ml.
DNA manipulation techniques.
Genomic DNA was extracted from
B. contaminans IST408 by using the DNeasy blood and tissue kit (Qiagen), following the manufacturer's instructions. Plasmid DNA isolation and purification, DNA restriction, agarose gel electrophoresis, and
E. coli transformation were carried out using standard procedures (
39).
B. contaminans electrocompetent cells were transformed by electroporation using a Bio-Rad Gene Pulser II system (200 Ω, 25 μF, 2.5 kV) and grown overnight before being plated on selective medium. Triparental conjugation to
B. contaminans strains was performed using the helper plasmid pRK2013 (
40).
Plasmid construction and complementation experiments.
Complementation of
B. contaminans mutant strains was performed by expressing
bceD,
bceE, or
bceF from the promoter of the
bce operon directing the biosynthesis of cepacian (
41) present in the replicative vector pBBR1MCS (
42). To prepare the plasmids expressing each of the genes, the
bce promoter and each gene region were amplified by PCR using
B. contaminans IST408 genomic DNA as the template. The primers used to amplify the
bce promoter region were Pbce-Fw (GAT
AAGCTTCTCCTCGATTGAAGT [restriction sites are shown in italics]) and Pbce-Rev (GTG
CATATGCTTCGATTCAAACGT). The primers used to amplify the
bceD,
bceE, and
bceF genes were bceD-Fw (GCT
CATATGCGGAACATCCTGATCGTCT), bceD-Rev (CAC
TCTAGAACAGGCTGACAGGAAAGTCG), bceE-Fw (GAA
CATATGCTGAAACGCCCGATG), bceE-Rev (TGA
TCTAGAGGAGCAGCTGGCCGAGGA), bceF-Fw (GAA
CATATGGTGAACACGCAAGCGAAA), and bceF-Rev (TTA
TCTAGAATGCGGATCAGGCGCTCA). The amplified promoter region was restricted with HindIII/NdeI, and the gene regions were restricted with NdeI/XbaI and ligated to the HindIII/XbaI sites of the intermediate pUK21 vector. Each fragment containing the
bce promoter and one of the gene regions was then cloned into the pBBR1MCS vector. The plasmids were named pLM136-2, pLM127-13, and pLM135-6 and carried the
bceD,
bceF, and
bceE genes, respectively; they were confirmed by DNA sequencing. The empty vector or the vector with the inserted gene was introduced into the corresponding mutant or parental strain by triparental conjugation.
Cell line culture.
The epithelial cell line used was CFBE41o-, derived from a patient homozygous for the cystic fibrosis transmembrane conductance regulator (CFTR) ΔF508 mutation, which leads to defects in chloride ion and water transport across the cell membrane (
43). CFBE41o- cells were routinely maintained in fibronectin/Vitrogen-coated flasks in Eagle's modified minimum essential medium (MEM) supplemented with 10% (vol/vol) fetal bovine serum (FBS; Lonza), 1% (vol/vol) nonessential amino acids (Gibco),
l-glutamine (2 mM; Sigma-Aldrich), and 1% (vol/vol) penicillin-streptomycin (Sigma-Aldrich) (
44) in a humidified atmosphere at 37°C with 5% CO
2.
Host cell attachment.
Prior to bacterial infection, epithelial cells were seeded onto fibronectin-coated 24-well plates (Orange Scientific) at 4 × 105 cells/well in supplemented MEM without antibiotics and incubated overnight at 37°C in a 5% CO2 atmosphere. Bacterial strains were grown in LB until the optical density at 640 nm (OD640) reached 0.6 (log phase) and were used to infect epithelial cells at a multiplicity of infection (MOI) of 10 (10 bacteria to 1 epithelial cell). Bacteria were applied to the seeded CFBE41o- cells in MEM supplemented medium, and the plates were centrifuged at 700 × g for 5 min, to facilitate bacterial attachment. The plates were then incubated for 30 min at 37°C in an atmosphere of 5% CO2. Each well was washed vigorously three times with phosphate-buffered saline (PBS) to remove unbound bacteria. Cells were lysed with buffer (0.01 M PBS, 20 mM EDTA, 0.5% Triton X-100; pH 7.4) for 30 min at 4°C. Adhesion of bacteria was quantified by CFU counts after plating serial dilutions onto LB agar and incubation for 24 h at 37°C. E. coli NCIB9415 was used as a negative control. Duplicates of each strain were performed per assay, and the results presented were obtained from three independent experiments. Results are expressed as the percentage of adhesion, which was calculated as the CFU recovered divided by the CFU applied to the epithelial cells, multiplied by 100.
Confocal laser scanning microscopy assays.
To visualize attachment to epithelial cells, bacteria were stained by using plasmid pIN29, which encodes the red fluorescent protein DsRed (
45). This plasmid was introduced into parental strain
B. contaminans IST408 or the
bceD::Tp,
bceE::Tp, and
bceF::Tp mutants by electroporation. Bacterial adhesion (MOI, 50) was performed as described above, but glass coverslips were placed into 24-well plates before cell seeding. At the end of the adhesion experiment, coverslips with cells were washed with PBS. Immunostaining experiments were performed as previously described (
46). For these experiments, samples were fixed with 3.7% (vol/vol) formaldehyde for 20 min, quenched with 50 mM NH
4Cl for 10 min, immersed in 0.2% (vol/vol) Triton X-100 for 5 min, and saturated with 5% (wt/vol) bovine serum albumin (BSA) during 30 min. Samples were then incubated with primary mouse E-cadherin antibody (1:100; Santa Cruz Biotechnology) for 1 h 30 min, followed by washing with PBS. The secondary antibody was a polyclonal goat anti-mouse antibody coupled to Alexa Fluor 488 (1:500; Santa Cruz Biotechnology).
Samples were examined on a Leica TCS SP5 inverted microscope (model DMI6000; Leica Microsystems CMS GmbH, Mannheim, Germany) with a 63×, 1.2-numerical aperture water apochromatic objective (
47). Orthogonal projections were generated with ImageJ software (
http://rsb.info.nih.gov/ij/).
Invasion of epithelial cells.
Studies of invasion of epithelial cells were performed as described previously (
28).
B. contaminans strains were applied to 4 × 10
5 CFBE41o- cells in MEM supplemented medium (MOI, 10). The plates were centrifuged at 700 ×
g for 5 min to facilitate bacterial attachment and incubated under standard conditions (37°C, 5% CO
2). After 2 h, the MEM was removed and 500 μl of ciprofloxacin (2 mg/ml) was added to kill extracellular bacteria. After 2 h of incubation with antibiotic, cell monolayers were washed three times with PBS and incubated in lysis buffer for 30 min at 4°C. The number of intracellular bacteria was determined by CFU counts on LB agar. The product of the last PBS wash before cell lysis was also plated onto LB agar to ensure that antibiotic killing activity was greater than 99.99%. Invasion was expressed as a percentage and was calculated as the CFU recovered divided by the CFU applied to the cells, multiplied by 100. Duplicates experiments for each strain were performed per assay, and the results are the mean values from three independent experiments.
Growth rates and ciprofloxacin MIC determinations.
Growth rates of the strains under study were determined in LB and MEM statically at 37°C in a 5% CO2 humidified atmosphere, and growth was measured by monitoring the OD640 for 24 h. Growth rates were calculated from the exponential phase of growth from at least three independent experiments. To determine ciprofloxacin MICs, serial dilutions of Mueller-Hinton medium with ciprofloxacin ranging from 0 to 256 μg/ml were inoculated with the parental and mutant strains for 24 h at 37°C under a 5% CO2 atmosphere, and growth was determined by measuring the OD640.
Bacterial infection of polarized lung epithelial cells.
The disruption of tight junction integrity by
B. contaminans strains was evaluated based on changes in transepithelial electrical resistance (TER) in polarized CFBE41o- cells. To obtain polarized epithelia, the cells were seeded at a density of 6 × 10
5 cells/well onto Transwell permeable supports (12-mm well; pore size, 0.4 μm; Costar, Corning, NY), which were precoated with Vitrogen (Nutacon, Netherlands). The FBS was replaced by UltraserG 24 h after seeding (
48). Cells were incubated for another 24 h before removal of the medium in the apical chamber, grown for 6 days with an air-liquid interface, and fed basolaterally on alternate days. The functional integrity of the epithelial monolayers was confirmed by measuring the transepithelial electrical resistance with an epithelial volt-ohmmeter (EVOM; World Precision Instruments). The monolayers were infected (MOI, 10) by resuspending bacteria (log phase) in antibiotic-free supplemented MEM, which was applied onto the apical surface. The TER was measured at different time points for up to 6 h.
E. coli infection and a well containing MEM only were used as controls of junction integrity during the assays and to correct the resistance values obtained.
Epithelial permeability.
The permeability of cell polarized monolayers was quantified by measuring the flux of fluorescein isothiocyanate (FITC)-labeled BSA across the epithelial layer, as described previously (
30). Log-phase bacteria (MOI, 10) suspended in antibiotic-free supplemented MEM containing 0.1% (wt/vol) FITC-labeled BSA (Sigma-Aldrich) were inoculated onto the apical surface of the cell monolayer. The medium in the basolateral chamber was initially free of FITC-labeled BSA. At 4 and 6 h after infection, 50 μl of medium was collected from the basolateral chamber and fluorescence was measured with a multimode microplate reader (FilterMax F5; Molecular Devices). The coefficient of permeability (P
app) was calculated as described previously (
49).
Western blot analyses.
To confirm that the strains under study had different abilities to disrupt tight junctions, polarized epithelial cell extracts from cell layers incubated with B. contaminans, E. coli (MOI, 10), or medium alone were prepared and ZO-1, occludin, and claudin-1 levels were analyzed by Western blotting, with glyceraldehyde-3-phosphate dehydrogenase (GAPDH) used as loading control protein. Briefly, polarized CFBE41o- cells were lysed 4 h postinfection by adding RIPA buffer (Sigma-Aldrich) and a protease inhibitor cocktail (Thermo Scientific) to the filters, followed by scraping to recover cell lysate. The protein content of the lysates was quantified by using a Nanodrop spectrophotometer, and proteins were applied to 6% SDS-PAGE gels (for ZO-1 and occludin) or 12% gels for claudin-1. Proteins were subsequently transferred to a nitrocellulose membrane by using a Trans-Blot Turbo transfer system (Bio-Rad) with the standard program Mix MW (25 V, 1.3 A, 7 min). Membranes were blocked with Tris-buffered saline solution containing 5% (wt/vol) skim milk and 0.5% (vol/vol) Tween 20 (TBS-T) for 1 h. Blots were incubated overnight at 4°C with primary antibodies against ZO-1 or claudin-1 (Invitrogen), occludin (BD Biosciences), or GAPDH (Santa Cruz Biotechnology), using a dilution of 1:1,000 for anti-occludin and 1:300 for the remaining antibodies. Membranes were washed three times with TBS-T and incubated with 1:2,000-diluted goat anti-mouse serum (Thermo Scientific) for ZO-1, occludin, and GAPDH detection and with goat anti-rabbit serum (Santa Cruz Biotechnology) for claudin-1 detection. The secondary antibodies were conjugated to horseradish peroxidase. Following 1 h of incubation at room temperature, membranes were washed 5 times with TBS-T. Proteins were detected by the use of ECL reagent (Amersham Biosciences), and chemiluminescence was captured by using a charge-coupled-device camera (Fusion Solo; Vilber Lourmat). The density of each individual band was normalized against GAPDH by densitometry using ImageJ software. The results are expressed as the percentage of ZO-1, occludin, or claudin-1 under each condition, compared with the control (uninfected cells).
Proinflammatory responses of CFBE41o- cells after exposure to B. contaminans.
CFBE41o- cells were seeded into 24-well plates and incubated under standard conditions for 24 h in supplemented MEM with heat-inactivated FBS. Cells were washed with PBS and incubated with bacteria (MOI, 10). After 24 h, supernatants were collected and centrifuged at 6,000 × g for 15 min. The samples obtained were analyzed using enzyme-linked immunosorbent assay (ELISA) MAX Deluxe kits (BioLegend), following the manufacturer's instructions.
Lipopolysaccharide analysis.
Lipopolysaccharide (LPS) was obtained from bacteria by microextraction using proteinase K digestion of proteins as described previously (
50). Briefly, 1.5-ml aliquots of bacterial cultures with an OD
640 of 0.7 were harvested and washed with PBS. The pellet was solubilized in 50 μl of lysis buffer (2% [wt/vol] SDS, 4% [vol/vol] 2-mercaptoethanol, 10% [vol/vol] glycerol, 1 M Tris-Cl [pH 6.8], and 0.1% [wt/vol] bromophenol blue). Bacterial proteins were then digested by 1-h incubation at 60°C with 10 μl of proteinase K (2.5 mg/ml). Ten-microliter LPS fractions were analyzed by 15% SDS-PAGE, and the LPS pattern was revealed by silver nitrate staining according to standard protocols (
51).
Statistical analysis.
All quantitative data were obtained from at least three independent assays which included duplicates for each strain. Error propagation was used to calculate standard errors, and one-way analysis of variance (ANOVA) statistics were used to determine P values, with parental B. contaminans IST408 as a reference group. Differences were considered statistically significant if the P value was lower than 0.05.
DISCUSSION
Most of the research on CF
B. cepacia complex pathogenicity has been dedicated to
B. cenocepacia, since this species, together with
B. multivorans, accounts for approximately 80% of
B. cepacia complex infections worldwide (
20). However, several reports have shown that other
B. cepacia complex species, among them
B. contaminans, are also implicated in transient or chronic infections, poor prognosis, and transmission between patients (
20,
21,
55). To gain insights into the
B. contaminans interaction with host cells, we investigated the role of a BY-kinase and an LMW-PTP in this process, as some of their homologues are known to interfere with host signaling (
8). Previous expression profiling and phenotype characterization of the parental strain
B. contaminans IST408 and the
bceD::Tp and the
bceF::Tp mutants (
7,
35) indicated that BceD and BceF are involved in multiple phenotypic characteristics, including motility, biofilm formation, EPS biosynthesis, resistance to stress conditions, and virulence in the
Galleria mellonella model. These observations suggest the existence of a complex regulatory network where the tyrosine phosphorylation state of a target protein(s), mediated by the BY-kinase BceF, possibly in conjunction with the PTP BceD, plays a fundamental role. Although several BceF homologues have been characterized and their roles in the regulation of protein function and cellular location demonstrated (
3), little is known about their importance in host-pathogen interactions. As an example, analysis of the
E. coli O157:H7 phosphotyrosine proteome showed that phosphorylation of a tyrosine residue of the regulator SspA positively affected expression and secretion of T3SS proteins and formation of A/E lesions on HeLa cell monolayers (
56). Similarly, a few LMW-PTP proteins homologous to BceD are known to interfere in several host signaling pathways (
8,
16). Accordingly, in our work we tested the importance of BceF and BceD in the pathogenesis of
B. contaminans infection by using the CFBE41o- cell line as a model. An important observation is that the absence of the BY-kinase or the LMW-PTP phosphatase is associated with similar phenotypes while interacting with CFBE41o- cells. This suggests that BceF and BceD, by having global regulatory functions, may act on the same unknown bacterial pathway that ultimately leads to the adhesion/invasion and tight junction disruption phenotypes observed here. The three-dimensional structures of BY-kinases suggest that the phosphatase may be critical for the cycling of the kinase between monomers and higher-order oligomers (
57). In this situation, not having BceF or having it in an inactive monomeric/oligomeric state due to the absence of BceD would perhaps result in the same cellular outcome regarding interactions with host cells.
The
B. cepacia complex infection process starts with adhesion of bacteria to the apical surface of epithelial cells (
29), but little is known about the structures involved in this host-bacterium interaction. Although some adhesin proteins of
B. cenocepacia have been implicated in attachment to epithelial cells (
46,
58,
59), no studies on the putative adhesins of
B. contaminans IST408 have been done. Previous expression profiling (under growth conditions dissimilar from the ones tested here) of the
bceF mutant compared to the IST408 parental strain showed decreased expression of a putative autotransporter adhesin homologue to BCAS0321 of
B. cenocepacia J2315 and at least eight genes encoding putative outer membrane porins (
7). Therefore, further experiments are needed to attribute a possible role of
B. contaminans IST408 adhesin/Omp proteins to the CFBE41o- cell adhesion phenotype. Studies also have shown that in some
B. cepacia complex species, the invasion process starts with the formation of microcolonies and of biofilms reassembling structures in the mucous layer that eventually reach the epithelial surface (
29). Previous data on
bceD::Tp and
bceF::Tp mutant biofilm formation showed that they form less biofilm on abiotic surfaces than the parental strain or the
bceE::Tp mutant (
7,
35). This phenotype correlates with the adhesion/invasion ability of the
B. contaminans tested strains toward the CFBE41o- cells in this study, suggesting that the formation of biofilm-like structures on the cell surface might be important for
B. contaminans cellular invasion.
Some species of the
B. cepacia complex invade eukaryotic cells via a membrane-bound vacuole, where bacteria have been shown to survive by escaping from late endosomes and replicating within epithelial cells (
26,
32,
60). Besides cellular invasion,
B. cepacia complex species have been shown to transverse the respiratory epithelium paracellularly, which may be associated with the
B. cepacia complex ability to disseminate beyond the lungs at a higher frequency than other CF pathogens, causing cepacia syndrome (
31). Accordingly,
B. cepacia complex migration to the basolateral surface of epithelium is associated with a strong decrease of TER due to the loss of cell junction integrity (
29). Duff and collaborators have shown that 4 different species within the
B. cepacia complex are able to disrupt epithelial monolayer integrity and translocate through to the basolateral side of lung epithelial monolayers (
28). In our study,
B. contaminans parental strain IST408 also dramatically reduced transepithelial resistance and increased the permeability of polarized CFBE41o- monolayers. In contrast, the abilities of
bceD::Tp and
bceF::Tp mutants to impair tight junction integrity were closer to those of the negative controls. Bacterial pathogens can interfere with epithelial tight junction integrity by different mechanisms, including changes at the expression level or phosphorylation level or dislocation of tight junction proteins (
61–63). In
B. cepacia complex bacteria, representative isolates of three epidemic lineages of
B. cenocepacia have been shown to transverse polarized 16HBE41o- respiratory epithelial cells (non-CF)
in vitro by dephosphorylation and dissociation of occludin from the tight junction complex, but no difference was observed for ZO-1 protein (
30). In another study with environmental
B. cenocepacia strains, no apparent effect on the tight junction protein ZO-1 was observed in non-CF polarized 16HBE41o- cells, while in CF polarized cells CFBE41o- cells, the amount of ZO-1 and its localization were altered (
52). In our study, we observed a reduction of ZO-1, occludin, and claudin-1 levels and these were more pronounced in parental
B. contaminans IST408 and the
bceE::Tp mutant than in the
bceD::Tp and
bceF::Tp mutants. The mechanism by which BceD and BceF affect tight junction integrity is unknown. BceF is an inner membrane protein, and its role in this disruption is most likely indirect. Regarding BceD, this protein could be secreted and interfere with host cell functions. Nevertheless, a recent study by Andrade and Valvano showed that under the
in vitro experimental conditions tested, BceD was not detected in the growth medium (
16). Despite this result, it cannot be excluded that, in the presence of CFBE41o- cells, BceD may be secreted.
The development of cepacia syndrome is also associated with increased levels of proinflammatory cytokines in blood and sputum (
64), particularly with a large amount of IL-8 (
53), which attracts neutrophils and macrophages into the CF lung. These cells of the immune system release free radicals and proteolytic enzymes to eliminate bacteria, but these mechanisms have been shown to be inefficient against
B. cepacia complex bacteria and contribute to a further increase in lung damage and to the establishment of chronic inflammation (
64). In this work, we have shown that in the absence of BceD and BceF proteins,
B. contaminans induces a lower proinflammatory response. Although the LPS profiles of the wild-type and mutant strains were comparable, it cannot be excluded that modifications of lipid A acylation or phosphorylation levels might occur. Expression profiling analysis of the
B. contaminans bceF::Tp mutant indicated an upregulation of the
lpxO gene, which encodes a putative dioxygenase required for acyl chain hydroxylation (
7), suggesting that different degrees of 2-hydroxylation might be present with
bceF::Tp mutant and wild-type strains. Modified lipid A structures with different phosphorylation or acylation patterns elicit different host immune responses (
65,
66). Nevertheless, Palfreyman and coauthors showed that
B. cepacia complex cell-free supernatants can also increase IL-8 production, suggesting that other factors besides LPS can enhance the immune response (
67). The reduced inflammatory response could also be due to the lower level of attachment to host cells and a concomitant lack of direct stimulation of epithelial cells. Further investigation into the adhesins and host pattern recognition receptors involved will help elucidate the mechanism. Taken together, our results indicate that the BceF and BceD proteins have an important role in
B. contaminans virulence, since a range of critical events involved in the infection of CF lung epithelial cells was compromised in both mutants. Moreover, since the BceF and BceD proteins have homologues in both Gram-negative and Gram-positive bacteria, their involvement in virulence might be a common feature among pathogens.