Microcin E492 Is an Unmodified Peptide Related in Structure to Colicin V

Mcc E492 producer was a recombinant E. coli strain, strain VCS 257 (Amp^r). The indicator strain for antimicrobial activity was E. coli DH5α. Preparation of medium M63, preservation of strains, and culture conditions were as described by Sable et al. (7). Microcin activities were determined as described by Portrait et al. (6).

Mcc E492 was prepurified by solid-phase extraction on Sep-Pak Plus C₁₈ cartridges (Waters, Saint Quentin en Yvelines, France) from a heated (10 min, 120°C) and centrifuged culture supernatant of an Mcc E492 producer in medium M63 (24 h, 37°C). The solid phase, loaded with 400 ml of supernatant, was washed with 20 ml of distilled water and then with 20 ml of a 50%-50% (vol/vol) water-methanol mixture. Mcc E492 was eluted with 30 ml of a 65%-35% (vol/vol) water-acetonitrile mixture and was then purified by reversed-phase high-pressure liquid chromatography (RP-HPLC) with a C₁₈ column (300Å pore size, 15 μm granulometry, 300 by 3.9 mm [inner diameter]; Delta-Pak; Waters). The mobile phase (flow rate, 0.6 ml min⁻¹) was water with 0.1% trifluoroacetic acid (TFA) (eluent A) and acetonitrile with 0.1% TFA (eluent B). The gradient was 30% eluent B for 10 min, 30 to 50% eluent B in 2 min, and 50 to 63% eluent B in 13 min. The optical density (OD) was measured at 215 nm. Mcc E492 appeared as a single sharp peak (retention time, 20.5 min). The Mcc E492 fractions were pooled, freeze-dried, and stored at 4°C.

The molecular mass of the microcin was determined on a Biflex matrix-assisted laser desorption ionization-time of flight-mass spectrometer (MALDI-TOF-MS; Brüker, Bremen, Germany) in the linear mode. Ionization was accomplished with the 337 nm beam from a nitrogen laser with a 3-Hz repetition rate. Spectra were obtained in the positive mode and were calibrated with the single and double charged peaks of horse heart myoglobin (2 pmol μl⁻¹) at m/z 16,952.5 and 8,476.8, respectively. A sample for analysis was prepared by the sandwich method, as described by Strub et al. (8).

Electrospray ionization mass spectrometry (ESMS) analysis was carried out on a VG BioQ mass spectrometer (Bio Tech, Manchester, United Kingdom). The sample diluted in 50:50 (vol/vol) water-acetonitrile with 1% formic acid solution was introduced into the ionization chamber through a capillary, and a 3.2-kV potential was applied between the end of the capillary and the first electrode. The solvent was evaporated by a nitrogen flow at 80°C. The calibration was performed with horse heart myoglobin (2 pmol μl⁻¹), and the scanning ranged from m/z 500 to 1,500.

MALDI-TOF-MS analysis revealed a single peak with a molecular mass of 7,887.8 Da. By ESMS, the accurate molecular mass of Mcc E492 was determined to be 7,886.68 ± 0.52 Da. Following retrieval of the mass spectrometry measurements, the peptide was subjected to Edman degradation. We obtained the first 59 NH₂-terminal residues.

Mcc E492 in 40 μl of phosphate buffer (50 mM; pH 7.5) and 10 μl of acetonitrile was digested with endoproteinase Asp-N (2 μg, 4 h, 37°C). The resulting peptides were analyzed by liquid chromatography (LC)-mass spectrometry (MS) (Table 1). LC was separated by RP-HPLC (300 Å pore size, 5 μm granulometry, 125 by 2.1 mm [inner diameter], Nucleosil C₁₈ column; Macherey-Nagel, Düren, Germany). The mobile phase (flow rate, 0.25 ml min⁻¹) was water with 0.1% TFA (eluent A) and acetonitrile with 0.08% TFA (eluent B′). The gradient was 2% eluent B′ for 10 min, 2 to 60% eluent B′ in 60 min, and 60 to 80% eluent B′ in 5 min, followed by isocratic elution with 80% eluent B′. The OD was measured at 215 nm. A T-shaped column divided the column effluent between ESMS and the detector with a split of 1/10 by volume. The ESMS was scanned over a mass range of m/z 300 to 1,700 at 7 s/scan. N-terminal sequencing of some of the peptides obtained was performed on a pulsed liquid automatic microsequencer (Procise cLC; Applied Biosystems Inc., Foster City, Calif.). Mcc E492 was found to be an 84-amino-acid polypeptide (predicted molecular mass, 7,886.57 Da). Its sequence is GETDPNTQLL₁₀NDLGNNMAWG₂₀AALGAPG*G*L⁺G₃₀*SA*A*LG*AA*G*G*A₄₀*L⁺QTVGQGLID₅₀ HGPVNVPIPV₆₀ LIGPSWNGSG₇₀SGYNSATSSS₈₀GSGS. The asterisks indicate conserved amino acids, and the plus signs indicate semiconserved amino acids.

C-terminal sequencing by enzymatic digestion with carboxypeptidase P did not give a result, in accordance with the C-terminal sequence SSSGSGS. This is in agreement with the results of Lagos et al. (5) and confirms that the translation product of mceA is a precursor peptide cleaved at either amino acid 15 or amino acid 19 (depending on the methionine used as the start codon), providing a processed active Mcc E492 of 84 residues. By comparison with the nucleotide sequence of mceA, it also shows that after the cleavage of the leader sequence, Mcc E492 is not postranslationally modified.

The hydropathy profile of precursor peptide MceA (5) shows a single hydrophobic transmembrane domain that corresponds to amino acids 21 to 41 of Mcc E492. This sequence is probably responsible for the pore-forming activity of the microcin.

Comparison of the amino acid sequence Mcc E492 and the published partial amino acid sequence of Col V (3) shows that the fragment from amino acids 20 to 33 of Col V and the fragment from amino acids 27 to 41 of Mcc E492 share significant homologies, with 10 conserved and 2 semiconserved amino acids (Table 1). No protein sequences which had significant homology to Mcc E492 were identified from the EMBL or the Infobiogen data bank.

The sequence of Mcc E492 is deposited in the SWISS-PROT protein sequence database (accession number P82962 ).